Accredited Short Courses

30% off 16th Birthday Celebration Enter code: ASC30
Is There a Difference Between White Cards and Other Health Safety Certifications

Is There a Difference Between White Cards and Other Health & Safety Certifications?

A local Work Health and Safety regulator may acknowledge white cards and other health and safety certifications. Interstate general construction induction training cards may look different. But, they all prove that its holder complies with the WHS regulations. The details will discuss the other cards you may receive depending on your location.

What are the Available White Cards and Other Health & Safety Certifications?

Local Work and Health Safety regulators release the following white cards and other certifications. Jurisdictions acknowledge them locally, and some are acceptable nationwide.

New South Wales GIT Cards

The Health & Safety Certifications in New South Wales have the following versions.

WHS Regulators throughout Australia recognise the cards issued from 1 September 2009 to 31 December 2011. In contrast, only the Western Australian jurisdiction acknowledges those issued between 29 March 2004 and 31 August 2009.

The Health & Safety Certifications in New South Wales have the following versions. WHS Regulators throughout Australia recognise the cards issued from 1 September 2009 to 31 December 2011. In contrast, only the Western Australian jurisdiction acknowledges those issued between 29 March 2004 and 31 August 2009.

The Health & Safety Certifications in New South Wales have the following versions. WHS Regulators throughout Australia recognise the cards issued from 1 September 2009 to 31 December 2011. In contrast, only the Western Australian jurisdiction acknowledges those issued between 29 March 2004 and 31 August 2009.

Australian Capital Territory Cards 

ACT WorkCover issues the following health and safety cards in the area.

NSW recognises the ACT cards released from 1 September 2009 to now.

ACT WorkCover issues the following health and safety cards in the area. NSW recognises the ACT cards released from 1 September 2009 to now.

Northern Territory Construction Induction Cards 

NT WorkSafe provides the following cards to those who completed the training in compliance with the National Code.

The sample shows that these cards have unique numbers and the Northern Territory Government and NT WorkSafe logos.

NT WorkSafe provides the following cards to those who completed the training in compliance with the National Code. The sample shows that these cards have unique numbers and the Northern Territory Government and NT WorkSafe logos.

Tasmanian construction induction cards

The Workplace Standards Tasmania issues the following cards to those who complete the general construction induction training.

It contains a unique number and the Workplace Standards Tasmania logo.

The Workplace Standards Tasmania issues the following cards to those who complete the general construction induction training. It contains a unique number and the Workplace Standards Tasmania logo.

Western Australia Construction Induction Cards

The white cards in Western Australia look like the one below.

NSW recognises this general construction induction training card.

The white cards in Western Australia look like the one below. NSW recognises this general construction induction training card.

Western Australia Blue Cards

The blue cards were the previously recognised health and safety certification before the release of white cards in September 2009.

NSW still recognises the blue cards today.

The blue cards were the previously recognised health and safety certification before the release of white cards in September 2009. NSW still recognises the blue cards today.

South Australian White Cards

SafeWork SA issues the below white card to those who submit records showing they complied with the required training.

The sample shows the white card has the date of issue and the SafeWork SA logo aside from the basic information of the cardholder.

SafeWork SA issues the below white card to those who submit records showing they complied with the required training. The sample shows the white card has the date of issue and the SafeWork SA logo aside from the basic information of the cardholder.

Queensland White Cards

Workplace Health and Safety Queensland processes the following white cards to those who comply with the WHS Regulation QLD.

Aside from the construction worker’s details, the white card contains information on the Registered Training Organisation that issued the course.

Workplace Health and Safety Queensland processes the following white cards to those who comply with the WHS Regulation QLD. Aside from the construction worker’s details, the white card contains information on the Registered Training Organisation that issued the course.

Queensland Blue Cards

The same Queensland regulator releases the blue cards if an applicant completed the 30215QLD – course in general safety induction construction industry.

Work Cover only recognises blue cards that the WHSQ and Department of Employment and Industrial Relations issue. 

The same Queensland regulator releases the blue cards if an applicant completed the 30215QLD – course in general safety induction construction industry. Work Cover only recognises blue cards that the WHSQ and Department of Employment and Industrial Relations issue. 

Victorian Induction Construction Card

There was a generation of the below red card until 30 June 2008 for those who successfully completed the training. In this area, it’s the Victorian Foundations for Safety construction industry basic induction course.

WorkCover continues to recognise the red cards issued to Victorian residents mutually.

There was a generation of the below red card until 30 June 2008 for those who successfully completed the training. In this area, it’s the Victorian Foundations for Safety construction industry basic induction course. WorkCover continues to recognise the red cards issued to Victorian residents mutually.

There was a generation of the below red card until 30 June 2008 for those who successfully completed the training. In this area, it’s the Victorian Foundations for Safety construction industry basic induction course. WorkCover continues to recognise the red cards issued to Victorian residents mutually.

 

There was a generation of the below red card until 30 June 2008 for those who successfully completed the training. In this area, it’s the Victorian Foundations for Safety construction industry basic induction course. WorkCover continues to recognise the red cards issued to Victorian residents mutually.

There was a generation of the below red card until 30 June 2008 for those who successfully completed the training. In this area, it’s the Victorian Foundations for Safety construction industry basic induction course. WorkCover continues to recognise the red cards issued to Victorian residents mutually.

What is the Difference Between White Cards and Other Health & Safety Certifications?

The sample white cards and other health & safety certifications show little difference between them. Design, colours, and logos change, but they all prove that a construction worker finished the required induction training. The cards also display information on which Registered Training Organisation provided it.

Why do the White Cards and Other Health & Safety Certifications show the RTO Number?

As shown above, many certifications indicate an RTO number and issue date. The WHS Regulations for white card mandate that only Registered Training Organisations may deliver the general construction induction course. 

Training.gov.au provides a list of all the RTOs who may deliver the training so you may obtain a work health & safety card.

Which RTOs May Help Construction Workers Obtain White Cards and Other Health & Safety Certifications?

Training.gov.au and the websites of local WHS regulators provide information on the Registered Training Organisations approved to deliver the general construction induction training. One is Accredited Short Courses (RTO NO 21903) which may help you obtain a white card in NSW and VIC.

When is the Release of White Cards and Other Health & Safety Certifications?

A local WHS regulator may take 60 days to release white cards and other health & safety certifications. So, Accredited Short Courses (RTO NO 21903) provides a Statement of Training the same day after completing a white card course. It is valid while authorities generate the required documents construction workers must bring onsite. 

How Much is the Training for White Cards and Other Health & Safety Certifications?

Registered Training Organisations may set different prices. Accredited Short Courses (RTO NO 21903) offers the white card course for only $140. It keeps its overheads low to make general construction induction training affordable. It is why an average of 20,000 students enrol in the company annually, obtaining their required certifications at work.

Are White Cards and Other Health & Safety Certifications Valid in Different Jurisdictions?

The WHS Regulations state that white cards and other health & safety certifications are valid if:

  • Used according to the terms and conditions under which it was granted
  • It is not suspended
  • It is not cancelled

A construction worker can perform his duties in a different jurisdiction. But he needs to bring his valid white card or its equivalent.

When do White Cards and Other Health & Safety Certifications Expire?

According to the regulations, a construction worker must re-enrol in a white card course if he has not worked for 2 years.

Conclusion

Local WHS regulators release white cards and other health & safety certifications to those who complete the general construction induction training. Jurisdictions have their design of the cards, meaning its holder completed a white card course. Only Registered Training Organisations such as the Accredited Short Courses (RTO NO 21903) may deliver the unit. Construction workers may use their white cards in other territories as long as it is valid and used accordingly. Health & safety certifications expire if their holder has not worked for 2 years. So, they must re-enrol in general construction induction training again.